Propagation of Normal Axisymmetric Waves in Compliant Elastic Cylinders Filled with and Immersed in a Fluid

The paper studies the relationship between the physical characteristics of a cylinder and the properties of normal axisymmetric waves in elastic–liquid waveguides. The cylinder is made of a compliant material in which the velocity of shear waves is less than the sonic velocity in a perfect compressible liquid. The complete system of dynamic elasticity equations and the wave equation are used to describe the wave fields in the elastic cylinder and fluid, respectively. This approach allows obtaining the dispersion characteristics of coupled normal waves in compound waveguides over wide ranges of frequencies and wavelengths. The curves of real, imaginary, and complex wave numbers versus frequency are plotted for specific pairs of waveguide materials. Computations are carried out for a thick-walled cylinder filled with a fluid and immersed in either vacuum or a fluid. It is found out that compliant and rigid materials of the cylinder affect differently the wave interaction process in elastic–liquid waveguides     

残余应力对压力容器破坏模式的影响分析

破前漏(简称LBB)是压力容器、核电站设备结构设计与评价中的一个重要准则.表面裂纹准静态扩展的几何形貌变化规律的预测是破前漏(LBB)评判十分重要的课题之一.本文对特定焊接残余应力场加载作用下,含三维表面裂纹的压力容器模型,用有限元软件(ABAQUS)进行了表面裂纹准静态扩展模拟计算,得到在此残余应力场作用下应力强度因子沿裂纹前缘的分布规律.结合外载引起的应力强度因子,就可以判别裂纹的扩展形貌,从而判断结构是否满足LBB要求.     

通气法控制超空泡流动的实验研究

在高速水洞中运用人工通气方法进行了航行体模型超空泡形态特性的系列实验研究.获得了不同通气流量、不同空化数和不同弗鲁德数下的空泡形态,建立了以弗鲁德数为参数的空泡几何特征参数与空化数的对应关系、空化数与通气流量系数之间的对应关系.验证了空化数是决定空泡尺度的主要无因次参数,通过改变通气流量可以有效地调控空化数,进而达到控制空泡形态的目的.文中同时给出了通气流量系数的实验曲线拟合公式,并与国外的相关实验和公式进行了比较,两者基本一致.所得结论对进一步的水下超高速航行体空泡形态控制技术研究具有参考价值.     

Probing the nature of the contact between fine particles by using ultrasound propagation

The propagation velocity (vs) of an ultrasonic signal through a granular material depends on the type of interparticle contact. For noncohesive glass beads, a power law behavior for consolidation stresses applied (σc) above 1 MPa has been measured in previous work. This equation is compatible with Hertz's interaction law between elastic solids. In the present work, we have tested the propagation velocity of ultrasound signals through a sample of fine powder. The tensile strength and compactivity of the powder were previously measured by means of the Seville powder tester (SPT), indicating plastic deformation of the surface asperities in contact for small to moderate consolidation stresses. However, the measurements of ultrasound propagation at high consolidations presented here are compatible with Hertz's law. This finding suggests that for high consolidation stresses, surface asperities are flattened, and it is therefore the elastic deformation of the bulk of the particles that determines the transmission of ultrasonic pulses.     

Sudden Blocking of a Supercritical Open‐Channel Flow

This paper reports results of experiments in which a steadystate nonuniform supercritical openchannel flow was suddenly blocked by a rapidly falling gate at a downstream distance of about one hundred critical depths. This results in a hydraulic jump propagating upstream. Experimental data on the shape, height, and propagation speed of its leading front are given. It is shown that the parameters of the jump differ significantly from the values found using a quasistationary approach.     

超声波无触点支承陀螺仪技术的理论分析及实现

提出了一种超声无触点支承方案，详细介绍了超声无触点支承原理。通过对声辐射理论的研究，获得超声无触点支承的理论依据。实验证明实现这种超声波无触点支承是可行的。根据这一理论，对三轴无触点支承结构进行了选择设计。     

FLEXURAL WAVE PROPAGATION IN NARROW MINDLIN''''S PLATE

Appling Mindlin's theory of thick plates and Hamilton system to propagation of elastic waves under free boundary condition, a solution of the problem was given. Dispersion equations of propagation mode of strip plates were deduced from eigenfunction expansion method. It was compared with the dispersion relation that was gained through solution of thick plate theory proposed by Mindlin. Based on the two kinds of theories, the dispersion curves show great difference in the region of short waves, and the cutoff frequencies are higher in Hamiltonian systems. However, the dispersion curves are almost the same in the region of long waves.     

Elastic impact on finite Timoshenko beam

In this paper the analytical solutions of the impact of a particle on Timoshenko beams with four kinds of different boundary conditions are obtained according to Navier's idea, which is further developed. The initial values of the impact forces are exactly determined by the momentum conservation law. The propagation of the longitudinal and transverse waves along the beam, especially, the effects of boundary conditions on the characteristics of the reflected waves, are investigated in detail. Some results are compared with those by MSC/NASTRAN.     

梁波传播的固有特性

以分布参数的理论为基础，分析了梁波传播的一些固有特性，说明了它们与周期性结构的关系，讨论了支持条件对波传播特性的影响，指出了如果把近似方法应用于波传播分析中，可能引起的一些问题．本文的结果可直接应用于周期性结构的分析中     

复合型表面裂纹疲劳门槛应力的估算

表面裂纹是工程构件常见的缺陷，由于实验数据的缺乏及其他困难，断裂力学应用于表面裂纹的疲劳扩展，其经验和成果还十分有限。本文利用复合型断裂准则，对圆棒试样表面小裂纹的门槛应力进行分析和估算，得到了较满意的结果。